Cleaning
• See DFU for cleaning instructions for each accessory
• For CVSM and Accessory Cable Management stand:
– Clean on a routine basis according to your facility’s protocols and
standards.
– The following agents are compatible with the monitor:
• Hydrogen Peroxide Cleaner Disinfectant Wipes (Clorox® Healthcare)
• Dispatch Hospital Cleaner Disinfectant Towels with Bleach (Clorox®
Healthcare)
• 70% isopropyl alcohol
– Wipe the monitor with a clean cloth slightly dampened with 70%
isopropyl alcohol.
• 10% chlorine bleach solution
– Wipe the monitor with a clean cloth slightly dampened with a
10% bleach and water solution.
– Rinse with a clean cloth slightly dampened with water.
– Allow the monitor surface to dry for a minimum of 10 minutes
before using.
• Do not submerge or spray anything directly onto device.
MC12691 35
To Next Page
Loading...
Need help?
General
