Directions for Use Standards, Specifications, and Accessories 63
Probe LED Indicators
Audiometry mode
Transducers
Intensity Levels
Probe:
Steady yellow: Occlusion
Blinking green: Ready to start
Steady green: Test in progress
Steady orange: Leak in pressure
No Light: Test is finished
Frequencies: 125, 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, 8000 Hz
Accuracy: ±2%
Total Harmonic Distortion: < 2.5% (125 to 3000 Hz measured acoustically at maximum dB HL; 4000 and
6000 Hz measured electrically
Audiometric Headset Pair External Headset earphones Type 51 cushions (10 ohms impedance)
Headband force per ANSI S3.6 and IEC 645 (4.5 ±0.5)
Insert Earphones: Ear Tone Insert earphones (50 ohm impedance)
External Headset earphones
Frequency Intensity
125 Hz -10 to 50 dB HL
500 to 4000 Hz -10 to 90 dB HL
6000 Hz -10 to 85 dB HL
250 and 8000 Hz -10 to 70 dB HL
An additional +10 dB is available per frequency via the +10 dB button.
Accuracy: 125 to 4000 Hz ±3 dB
6000 and 8000 Hz ±5 dB
Step Size: 5 dB
Signal-to-Noise Ratio: > 70 dB in 1/3 octave; less than -10 dB HL for levels less than 60 dB HL
Rise/Fall Time: 20 to 50 msec
To Next Page
Loading...
Need help?
General
