OPERATION
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet buttons simultaneously
• Display Shows:
Press Dark button to exit.
Alert Priority
When two or more signals are received at the same time, the
alert priority is:
1. Laser 2. Speed Radar 3. Safety Warning System™
EXAMPLE: If X band is alerting, then suddenly a laser signal
is detected, the laser warning will override the X band alert.
Safety Warning System™
In communities where transmitters are located, the Safety
Warning System™ provides over 60 text messages. When
SWS™ is detected the audio alert is geiger counter-like.
Safety Warning System Text Message
Example: Poor - Road - Surface.
NOTE: Not all areas have Safety Warning System™
transmitters.
Intellicord® Ready
The optional INTELLICORD® power cable allows the user to
remotely control two of the following detector features (Power
On/Off, City Modes, Dim/Dark, Mark Waypoint and Quiet/
Auto Quiet) with a press of a button located on the power
cable’s plug. See option mode for selecting the functions to
work with the INTELLICORD®.
Reset Features
All user features can be reset to factory settings.
• Unplug the Power Cord from the unit.
• Press and hold the Power and Quiet buttons.
• Plug the Power Cord into the unit.
• Wait for 2 beeps.
Release the Power and Quiet buttons.
Unit is now reset to the following features and settings.
To Next Page
Loading...
Need help?
General
