INSTALLATION
Mounting Guidelines
• Mount the unit as low as possible near the center of the
windshield.
•
•
Do not mount the unit behind wipers, ornaments, mirrored
sunscreens, etc. These obstructions have metal surfaces
which can affect radar and laser signals and reduce
critical warning time. (Regular tinted glass does not affect
reception).
Some windshields have an Instaclear™ or Electriclear™
type coating, which affect radar signals. Consult your
dealer or the owner’s manual supplied with your vehicle to
determine if your windshield has this coating.
• Avoid placing the unit in direct contact with the
windshield.
• To reduce the possibility of theft, conceal the unit when
not in use.
IMPORTANT: Make sure the unit is level
Windshield Mounting
• Install the two suction cups and rubber bumper onto the
bracket by fitting them into their holes.
• Press the suction cups onto the windshield at the location
you have chosen.
Windshield
Mounting
Rubber
Bumper
To Next Page
Loading...
Need help?
General
