POP™ MODE ALERTS
POP™ Mode Alerts
POP™ Mode is a feature on some radar guns operating on K
and Ka bands. When the gun is in POP™ Mode and activated,
a brief burst of energy, less that 1/15 of a second, is transmitted
and the vehicle’s speed is quickly acquired. A detector without
POP™ Mode detection capability cannot respond to this brief
transmitted. Because POP™ Mode radar utilizes the same K or
Ka band frequencies, POP™ Mode Alerts will be displayed as
regular radar alerts.
UPDATING THE DATABASE
Updating the Database
Follow the steps below to update the Laser-Radar Detector.
Step
1: Remove the Laser-Radar Detector from the vehicle and
bring it to your PC. Note: You do not need to power the Laser-
Radar Detector to update it.
Step 2: Download the update program and install it on your PC.
Note: Program is not MAC compatible
Step 3: Download and save the .msc file downloaded to your
PC. Create a folder for the unit so you can store future updates
and save this file into the newly created folder.
DO NOT RENAME THE .msc FILE OR TRY TO OPEN IT!
Step 4: Open the update program and plug the USB cable into
the Laser-Radar Detector.
Step 5: Click the “Open File” button on the update program
and locate the saved file from Step 3. Click the “DB Update”
button to install the file.
Step 6: When update is complete, close the update program,
unplug the USB cable and the Laser-Radar Detector is ready
with the new updates.
To Next Page
Loading...
Need help?
General
