Worlde EASYCONTROL User Manual

Parts and their functions
1. MIDI control group
A knob, slider, button are collectively called a MIDI control group. The EASYCONTROL has nine
MIDI control groups.
a. Knob
These knobs transmit control change messages.
b. Slider
These sliders transmit control change messages.
c. Button
These buttons transmit control change messages or note messages.
2. Transport button
There are six transport buttons: [REW], [PLAY], [FF], [LOOP], [STOP], and [REC]. These buttons
transmit control change messages or MMC (MIDI Machine Control) messages.
3. Assignable buttons
These two buttons can be used as MIDI CC switches or Note.
4. Bank buttons
Use this button to switch between the four banks. A “bank” is a set of parameter assignments for
the controllers (knobs, sliders and buttons, etc.) so that the controllers can be used to operate
your DAW or software synthesizer. The EASYCONTROL has four banks. The four banks are
collectively called a “bank set.” You can use EASYCONTROL software Editor to change the
assignment of each controller. (➞ “Making detailed settings”)

Worlde EASYCONTROL Specifications

Power

power supply	USB bus power mode
current consumption	100 mA or less

Ports & interfaces

connectors	USB connector (mini B type)

Weight and Dimensions

width	13.4 inches / 340 mm
depth	3.9 inches / 100 mm
height	0.8 inches / 20 mm
weight	14 oz / 445 g