Worlde EASYCONTROL User Manual

the button will send a control change message with the Off value.
Toggle: Each time that you press the button, the control change message will alternate between
the On value and the Off value.
Note Number [C-1...G9]
This specifies the note number of the note message that is transmitted.
CC Number [0...127]
Specifies the CC number of the control change message that will be transmitted.
On Value [0...127]
Specifies the On value of the control change or note on message.
Off Value [0...127]
Specifies the Off value of the control change message. You can set this only if the assign type is
“Control Change.”
Transport buttons
Operating the transport buttons will transmit either control change messages or MMC messages,
depending on the assign type. For each of these six buttons, you can specify the message that is
assigned, the way in which the button will operate when pressed, the control change number, or
an MMC command.
Assign Type [Control Change/MMC/No Assign]
Specifies the type of message assigned to the transport button. You can specify that the button be
disabled, or assign a control change message or MMC message.
Button Behavior [Momentary/Toggle]
Selects one of two types of behavior for the button:
Momentary: A control change message with a value of 127 will be transmitted when you press
the transport button, and with a value of 0 when you release the button.
Toggle : Each time you press the transport button, a control change message with a value of 127
or 0 will be transmitted alternately. You can’t specify the button behavior if the assign type is
“MMC.” If you’ve specified “MMC,” an MMC command will be transmitted each time you press the
button.
CC Number [0...127]
Specifies the control change number of the control change message that is transmitted.
MMC Command [Stop/Play .../MMC Reset]
Selects one of the following thirteen types of MMC command as the MMC message that will be
transmitted. Stop, Play, Deferred Play, Fast Forward, Rewind, Record Strobe, Record Exit,

Worlde EASYCONTROL Specifications

Power

power supply	USB bus power mode
current consumption	100 mA or less

Ports & interfaces

connectors	USB connector (mini B type)

Weight and Dimensions

width	13.4 inches / 340 mm
depth	3.9 inches / 100 mm
height	0.8 inches / 20 mm
weight	14 oz / 445 g