To Next Page

To Previous Page

Owner’s Manual of Lawn Mowing Robot EN

Before attempting to replace your Landroid

’s Blades, turn the

power off and put on protective gloves and follow these steps:

1. Gently flip the Landroid

over.

2. Remove the battery cover and remove the battery.

3. Take the screws off the Blades with a screwdriver (See Fig. M)

4. Firmly screw on the new Blades.

5. Refit the battery and the battery cover.

IMPORTANT: After screwing the Blade to the Blade

Disc, make sure the Blade is able to spin freely.

8.2 Keep it clean

WARNING: Before cleaning, turn your Landroid

OFF. Put on protective gloves before cleaning the

Blade Turning Disc (13) and do not rinse or flush with

water.

A. Cleaning the body

Your Landroid

will live a much happier and longer life if it is

cleaned regularly. Although, since your Landroid

is an electric

machine, you will need to take care when cleaning. DO NOT

use a hose, high pressure washers or otherwise pour

running water on your Landroid

. It is best to use a spray

bottle filled with water. When cleaning the machine body, use a

soft brush or clean cloth and avoid using solvents or polishes (See

Fig. N). Lastly, remove all build up of grass clippings and debris.

B. Cleaning the Underside

Again, it is important that you power the Landroid

OFF and wear

protective gloves before touching the Blade Turning Disc (13).

First, flip your Landroid

upside down to expose its underside.

Here you will see the Blade Disc, the chassis, and the Front Wheel

(11) and Driving Wheels (6). Clean everything thoroughly with a

soft brush or moist rag.

WARNING: NEVER clean the underside of Landroid

with running water. Component damage can occur. (See

Fig. O1, O2)

Rotate the Blade Disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any

obstructions.

IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the

tiniest crack can decrease your Landroid

's mowing output.

C. Clean the contact pins and the charging strips

Clean the Contact Pins (2) located on the Charging Base (3) and the Charging Strips (4) located on the Landroid

using a

cloth. Remove any built up grass clippings or debris around the Contact Pins and charge strips periodically to ensure the

Landroid

successfully charges each time.

Brand	Worx
Model	S Basic LANDROID
Category	Lawn Mower
Language	English

Worx S Basic LANDROID User Manual

Table of Contents

Questions and Answers:

Worx S Basic LANDROID Specifications

Related product manuals