Owner’s Manual of Lawn Mowing Robot EN
8
3. Control panel
Start
1) After the boundary wire installation, you can start using the Landroid
®
(Please refer to Installation guide for boundary
wire installation).
2) Turn the main switch (8) to “I”(on). Wait until the battery indication light stays green. (If Landroid
®
has low battery
capacity, the battery indication light will stay red.) If the battery is too low, it will not stay red but shut-down to prevent
battery damage (please refer to Battery Life for emergency charge).
3) Press , then press to start mowing.
4) Press and to make Landroid
®
go to the charging base.
Landroid
®
will work continuously until reaching low battery power level and then it will return to the charging base. Once
charging is complete, Landroid
®
will automatically resume mowing or it stay in the charging base according to mowing
schedule.
4. Intended Use
The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better
looking lawn than ever before. It is not intended for digging, sweeping or snow cleaning.
Battery indication light
Displays battery/machine
status
START
Starts mowing/Corrects
the problem
HOME
Sends Landroid
®
to its
charging base during
operation and activates
charging
OK
Confirms any setting/
Enters Wi-Fi connection
mode
STOP
Stops Landroid
®
during
operation
Error indication light
Displays error messages
To Next Page
Loading...
Need help?
General
