Getting started with your new scanner
4800/2400 Series Installation and User Guide 1-3
Figure 1-3 Unlock scanner
NOTE: The locking tab protects the scanner’s scan head by
holding it securely in position. Lock the scanner when transporting
it from one location to another, but always remember to unlock it
before scanning. The scanner will not scan when locked.
2. If your scanner does not have a Transparency Adaptor, go to
Step 3. If your scanner has a Transparency Adaptor, check
that the cable is plugged into the option port on the back of the
scanner.
Your scanner is shipped with the cable already plugged into
the option port, however, if the cable came loose during
shipping, you must plug it into the port securely.
Figure 1-4 Plug in adaptor cable
3. If your USB cable is connected to the scanner, plug the USB
cable on the back of your scanner into any USB port on your
computer. If you USB cable is separate, plug one end of the
cable into any USB port on your computer and plug the other
end of the cable into the scanner’s USB port.
Figure 1-5 Plug in the USB cable
Unlocked position
To Next Page
Loading...
Need help?
General