To Next Page

To Previous Page

SETTING UP PRINTING ON MAC OS X

Setting up the Fiery EXP4110 on Mac OS X

After you install the printer driver ﬁles on Mac OS X, you must set up the Fiery EXP4110

in the Printer Setup Utility (or Print Center). This section describes how to set up the

Fiery EXP4110.

You must also conﬁgure the Fiery EXP4110 for the options installed on the printer to allow

the Fiery EXP4110 to take advantage of the printer options. Conﬁgure the options manually,

or for TCP/IP network connections, use the Two-Way Communication feature to conﬁgure

the options automatically.

NOTE: For more information about the print settings that use these options, see Print Options.

TO SET UP THE FIERY EXP4110 IN THE PRINTER SETUP UTILITY (OR PRINT CENTER)

1 Choose Applications from the Go menu, open the Utilities folder, and start Printer Setup

Utility (or Print Center).

The Printer List dialog box appears.

2 Click Add.

3 Choose AppleTalk or IP printing from the menu that appears.

4For AppleTalk, choose the AppleTalk Zone and choose the name of the Fiery EXP4110.

Installable option Selections

Finisher Option None, D-Finisher

Folder Tray Option Not Installed, Folder Tray

Interposer Not Installed, Interposer

Booklet Tray Option Off, On

Optional Trays Not Installed, Trays 6 and 7 (HCF)

Punch Option Not Installed, 2/3 hole Punch, 2/4 hole Punch

Xerox 4110 Printing Guide

Other manuals for Xerox 4110