3-32 Phaser 7750 Printer Service Manual
5
1. Is line voltage present at FS47 on the
AC drive board?
Go to step 6. Go to step 7.
6
1. Check the wiring harness between
FS47 and J600-1 for an open circuit or
poor connection.
2. Is the wiring harness OK?
Replace the fuser
assembly.
Replace the AC
power chassis
assembly.
7
1. Check for +5 VDC at P/J 590-3 on the
AC drive board.
Go to step 8. Replace the
engine control
board.
8
1. Check for +24 VDC at P/J 590-1 on the
AC drive board.
Replace the AC
power chassis
assembly.
Replace the fuser
assembly.
Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No
To Next Page
Loading...
Need help?
General