Xerox Color C60/C70 Series User Manual

Detailed Specifications Xerox Color
®
C60/C70
Customer Expectation and Installation Guide 3
Operating Environment
Operating
Environment
C60/C70
Required Temperature
Range
50° to 82° F (10° to 28° C)
Required Relative Humidity
15% to 85% RH
Altitude (above sea level)
Max of 8,200 (2,500 meters)
Sound Power Levels
Operating: 6.8 B(A)
Standby: 3.6 B(A)
Sound Pressure Levels
Operating: 56 dB(A)
Standby: 18 dB(A)
Electrical Requirements
Electrical
C60/C70
North America
Voltage : 110-127 VAC +/- 10%
Frequency: 50/60 Hz +/- 3%, 15 A
Europe / Asia /
South America /
Africa
Voltage : 220-240 VAC +/- 10%
Frequency: 50/60 Hz +/- 3%, 10 A
NA Specific Power Requirements:
C60/C70
Line Option
Sole Use (not required but
recommended)
Voltage 110-127
Amperage 20
Cycles 60 Hz, Single Phase
Xerox Receptacle Part Number 600S3703
Receptacle NEMA Part Number 5-20R
Power Cord Length 8.5ft.
Receptacle Diagram
The Xerox Color C60/C70
requires the use of a 20-ampere
outlet, which is standard in most
modern office buildings. Consult
the diagram (right side) to
confirm the existence of this
outlet in the proposed
installation space.
EU Specific Power Requirements:
C60/C70
Line Option
Sole Use (not required but
recommended)
Voltage 220-240
Amperage 10
Cycles 50 Hz, Single Phase
Receptacle
The Xerox Color C60/C70 requires
the use of a 10-ampere outlet,
which is standard in most modern
office buildings. Consult with local
service to determine the country
specific receptacle and confirm the
existence of this outlet in the
proposed installation space.
Receptacle NEMA Part Number 5-20R
Power Cord Length 8.5ft.
Accessories Requiring External Power Source
Conv. Stapler
(120V 15 A) / (220V 10 A
Print Server
(120V 15 A) / (220V 10 A
Monitor
(120V 15 A) / (220V 10 A
OHCF (1- or 2- tray)
(120V 15 A) / (220V 10 A)
IFM
(120V 15 A) / (220V 10 A
BR Finisher
(120V 15 A) / (220V 10 A)
BR Booklet Maker Finisher
(120V 15 A) / (220V 10 A
Standard Finisher
(120V 15 A) / (220V 10 A)
Booklet Maker Finisher
(120V 15 A) / (220V 10 A)
GBC Advanced Punch
(120V 15 A) / (220V 10 A)
Square-Fold Trimmer
(120V 15 A) / (220V 10 A)
C/Z Folder
(120V 15 A) / (220V 10 A)
• Spectrophotometer powered through USB port
Feature Specifications
Print
C60/C70
First Print Out Time
3
As fast as 9.44 sec.
Resolution
Up to 1200 x 1200 dpi, 256 shades of gray
Registration
Printing registration specifications for 8.5 x
11” (A4):
• ±0.7 mm (side 1-2), along the lead edge
from Trays 1-4
• ±1.2mm (side 1-2) along the side edge
from Trays 1-4
• Skew along Lead Edge from Bypass
tray skew is ±1.5mm.
Max Printable Area
The Xerox® Color C60/C70 will reproduce
11” x 17” full bleed when printing on 12” x
18” or 13” x 19” paper and A3 full bleed
when printing on SRA3 paper. The
maximum length images (476.6mm) are
only produced on media 19” long. On all
media there is a Lead Edge deletion of
4mm and a Trail Edge deletion of 4mm.
Side edge deletion is 3mm except for 13”
x 19” media. On 13” x 19” media the side
deletion is 3.5mm.
Max Image Area
305mm x 476.6mm 12” x 18.76”
Guaranteed Image Quality Area:
297mm x 476.6mm 11.69” x 18.76”
Print Features
Standard:
• Print from USB, Earth Smart Driver
Settings, Job Identification, Booklet
Creation, Store and Recall Driver
Settings, Bi-directional Status, Scaling,
Job Monitoring, Color By Words, Xerox
®
PrintBack
• Application Defaults
• Banner Sheet Enable / Disable
•
Bi-directional Status
3
The first print and copy out times were measured with image quality setting
at defaults, Reduction/Enlargement at 100%, selecting and feeding a 8.5x11 /
A4 plain paper sheet from tray 1 feeding to the bottom center tray without any
finisher installed.
120 V 20A
NEMA 5-
20R

Xerox Color C60/C70 Series Specifications

General

Brand	Xerox
Model	Color C60/C70 Series
Category	All in One Printer
Language	English