User’s Guide 5
Using the Preview
Window
Clicking the Preview button will display the preview window for the scanner interface. Use the
preview option if you want to scan and display a sample image that reflects the current settings in
the main interface. The preview window is also where you can define custom scan regions. Please
refer to “Scan Regions” for instructions on creating and scanning custom regions.
1. Select the initial scan settings you want to use for the preview image and scanning.
If you want to modify the settings for a particular preset, make sure you select that preset
before continuing.
2. Click the Preview button to open the preview window.
If there is a page in the scanner, the scanner will scan and display a sample image in the
preview window. If you do not have a page in the scanner when you click Preview, the preview
window will open and display an empty scan area. You will need to place a page in the
scanner and click Get preview to scan and display a sample image.
3. The preview window displays the scan area and the current scan region. When you pass the
mouse cursor over the scan region it will highlight for you to move or resize it. Please refer to
“Scan Regions” for instructions on creating, resizing and deleting regions.
– Click the zoom in or zoom out button to zoom in or out on the preview image in 15%
steps. Click the up or down arrows for the Zoom level box to zoom in or out on the preview
image in 5% steps. Click the zoom to fit button to fit the entire preview area within the
preview window.
To Next Page
Loading...
Need help?
General