DocuMate 250 Scanner Installation Guide 15
Scanning with the Scanner Button
Creating a New Button Configuration
You cannot change settings of the preset (default) configurations.
To use settings other than those offered by the preset
configurations, you must create a new configuration. You can do
this either by copying a preset configuration and making the
desired changes or by creating a new configuration from scratch.
To create a new configuration:
1. Scroll the applications in the Select Destination list and click
the application for which you want to create a new
configuration.
2. Do one of the following:
• Click the New button.
• Select a preset configuration and click the Copy button.
3. On the New Scan Configuration dialog box, type a name.
• If you are copying from a preset configuration, leave the
name as is or change it as required.
4. Select scan settings for the new configuration.
Mode—Select a scanning mode as follows:
• Black/White to scan in black and white. For example, letters
and memos are usually scanned in black and white.
• Grayscale to scan items such as documents containing
drawings or black and white photographs. The scanning
produces an image in varying shades of gray.
NOTE: If you select a printer or other device in the Select
Destinations list, the dialog box may have an additional tab for
setting specific options for the particular device.
To Next Page
Loading...
Need help?
General