DocuMate 250 Scanner Installation Guide 45
Maintenance
Maintenance
This section contains information on maintenance,
troubleshooting, uninstalling, scanner specifications, and spare
parts.
Cleaning the Automatic Document Feeder
You may need to clean the ADF feed mechanism if your
documents do not feed easily into the ADF, or several feed in at the
same time.
To clean the ADF:
1. Wet a cotton swab with some isopropyl alcohol (95%).
2. Press the ADF cover release on the top left of the scanner body
to open the automatic document feeder cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean
its entire surface.
4. Wipe the pad from top to bottom. Be careful not to snag the
swab on the springs on either side of the pad.
5. Close the cover when you’re finished.