Xerox DocuMate 4440 User Manual

Xerox DocuMate 4440
User’s Guide
115
Scanning with Job Separation
Use job separation to have One Touch create a new file each time a separator is detected when
scanning a multiple page batch. For example, if you want to scan financial statements from several
different banks, you can place a stack of statements in the scanner and One Touch will separate each
statement into a different file based on your selected job separator.
1. Open the One Touch Properties window.
2. Select the Destination Application, File Format, and Scan Configuration applicable to your
scanning batch.
Make sure the option Create single image files is not selected. If this option is selected, the job
separation features on the Options tab will be disabled.
3. Click on the Options tab in the One Touch Properties window.
4. Click on the down arrow next to the Select Button list to select the button you want to modify.
Note that the options in this window are specific to each One Touch button.

Xerox DocuMate 4440 Specifications

General

Brand	Xerox
Model	DocuMate 4440
Category	Scanner
Language	English