Xerox DocuMate 4830 User Manual

Xerox DocuMate 4830
User’s Guide
57
• From left—input the upper-left corner start position measured from the left-side of the page.
• From top—input the upper-left corner start position measured from the top of the page.
• Width—input the width of the area to be removed.
• Height—input the height of the area to be removed.
Color—this color field shows the selected fill color for the redacted area(s). When the software removes the area
you specify, it fills the area with the color you have selected here. To change the color, click the artist palette button
to open the Windows color palette. Select the color you want then click on OK. The color you selected will now
display in the Color field on the Redaction Settings tab.
Preview—this color field shows the actual color that will fill the redaction area in the final scanned image. When
scanning in color, the Preview field will match the Color field. When scanning in Grayscale, the preview field will show
the gray version of the color you selected, and that color will be in the final scanned image. When scanning in
Black&White, the preview field will display black or white depending on the darkness of the color you selected, and
the final image will have the redacted area(s) be black or white.
Technical Note
The options on the Page Settings tab will affect the redaction options as described below:
• On the Page Settings tab, click the name inches or mm to toggle between the two units of measurement.
When you click back on the Redaction Settings tab, the lower-right corner displays the Paper size in the units of
measurement you selected.
• Make sure the page size selected on the Page Settings tab is correct for the documents you are scanning,
otherwise the redaction may not occur in the correct area.
Color
scanning
Grayscale
scanning
Black&White
scanning

Xerox DocuMate 4830 Specifications

General

Film scanning	-
Color scanning	Yes
Maximum scan size	297 x 2997 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	50 ppm
ADF scan speed (color, A4)	30 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	100 ipm
Duplex ADF scan speed (color, A4)	60 ipm
Scanner type	Flatbed & ADF scanner
Product color	Blue, Grey
Built-in display	No
Sensor type	CIS
Scan drivers	ISIS, TWAIN, WIA
Daily duty cycle (max)	3000 pages
Auto document feeder (ADF) input capacity	75 sheets
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Input voltage	100-240 V
Power supply type	AC
Power consumption (standby)	15 W
Power consumption (typical)	30 W
Minimum RAM	2048 MB
Minimum storage drive space	350 MB
Cables included	AC, USB
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	499 mm
Width	581 mm
Height	194 mm
Weight	12000 g