Xerox DocuMate 632 User Manual

DocuMate 632 Scanner User’s Guide 109
Maintenance
To Replace the roller assembly:
1. Hold the roller by its right hand side and slide the left hand side
into its housing. Make sure the small wheel on the left end of
the roller seats properly into its housing.
2. Angle the roller up and into its channel. Make sure the wheel on
the left hand side remains seated in its housing.
3. Push the locking flange up to lock the roller in place.
4. Close the ADF cover.
Your scanner is now ready to scan with its new roller assembly.

Xerox DocuMate 632 Specifications

General

Brand	Xerox
Model	DocuMate 632
Category	Scanner
Language	English