DocuMate 632 Scanner User’s Guide 85
Scanning with the TWAIN Interface
Scanning from the TWAIN Basic Interface
The Basic Interface can scan a preview of the image so you can
adjust its appearance before scanning the final image. After
adjusting the appearance, you click the Scan button on the Basic
Interface (not on the scanner) to scan the item.
To scan from the Basic Interface:
1. From the Scan Type menu, choose the option to scan:
• Scan Reflective Using—Scans the document on the
Flatbed.
• Auto Document Feeder-Duplex—Scans two-sided
documents from the Automatic Document Feeder.
• Auto Document Feeder-Simplex—Scans one-sided
documents from the Automatic Document Feeder.
2. Choose the color, grayscale, or black and white option from the
Picture Type menu.
3. Click the Preview button.
The scanner scans the item and displays a preview image. You
can now use the options on the Basic Interface to adjust the
image.
Click the Advanced Interface button if
you would rather scan with the
Advanced Interface.
NOTE: If you want to preview the document before scanning
from the ADF, make sure only one page is loaded into the
scanner.
To Next Page
Loading...
Need help?
General