Printing
Phaser 3010/3040 Printer 21
User Guide
Printing on Both Sides of the Paper
This section includes:
Setting Up 2-Sided Printing ............................................................................................................................................. 21
Loading Paper for Manual 2-Sided Printing ............................................................................................................. 22
The Phaser 3010 Printer supports manual 2-sided printing. You can set printing preferences to print your
jobs on both sides of the paper.
Use 2-Sided Printing to specify the page orientation for the printed output.
You can specify the page layout for 2-sided printing, which determines how the printed pages turn. These
settings override the application page orientation settings.
Portrait
2-Sided Print, Flip on Short
Edge
Landscape
2-Sided Print, Flip on Short
Edge
Setting Up 2-Sided Printing
To set up manual 2-sided printing:
1. From the File menu, select Print.
2. Select the printer from the Select Printer list, then click Properties.
3. From the Duplex window on the Paper/Output tab, select Flip on Long Edge or Flip on Short Edge.
4. Select the Paper Size and Paper Type to match the paper you are using.
5. To close the Printing Preferences dialog box, click OK.
6. To start printing, click Print.
Note: When you start manual 2-sided printing, the Manual Duplex Setup window appears. Do not
close the window until you have completed the 2-sided printing. Once the window is closed, it cannot
be reopened.
To Next Page
Loading...
Need help?
General