Xerox Phaser 3010 User Manual

Safety
Phaser 3010/3040 Printer 9
User Guide
WARNING: Avoid the potential of electrical shock by ensuring that the printer is properly grounded.
Electrical products can be hazardous if misused.
Only use an extension cord or power strip designed to handle the electrical current capacity of
the printer.
Verify that the printer is plugged into an outlet that is providing the correct voltage and power.
Review the electrical specification of the printer with an electrician if necessary.
Do not place the printer in an area where people can step on the power cord.
Do not place objects on the power cord.
Replace the power cord if it becomes frayed or worn.
Do not unplug or plug the power cord while the printer is turned on.
To avoid electrical shock and damage to the cord, grasp the plug when unplugging the power cord.
The power cord is attached to the printer as a plug-in device on the back of the printer. If it is necessary to
disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.

Xerox Phaser 3010 Specifications

General

Print Technology	Laser
Print Speed	20 ppm
Paper Capacity	150 sheets
Connectivity	USB 2.0
Processor	150 MHz
Memory	64 MB
Output Capacity	100 sheets
Printer Type	Monochrome Laser Printer
Duplex Printing	Manual
Maximum Paper Size	A4
Toner Yield	1, 000 pages
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	30, 000 pages
First Page Out Time	8 seconds
Media Sizes Supported	A4, Letter, Legal
Operating System Compatibility	Windows, Mac