I
NTRODUCTION
1.6
Understanding the Control Panel
On Line/Error( ) and Toner Save( )
LEDs
LED Description
If the lights green, the printer is ready to print.
If the lights red, the printer is experiencing an error,
such as jammed paper, no paper, the open top or front cover,
or the empty toner cartridge.
See “Troubleshooting Error Messages” on page 5.17.
If you press the button while the printer is receiving
data, the
LED blinks red to cancel printing.
In Manual Feed mode, if there is no paper in the tray, the
LED blinks green. Load paper into the tray and the LED
stops blinking.
If the printer is receiving data, the LED slowly blinks
green.
If the printer is printing the received data, the LED
blinks green fast.
To Next Page
Loading...
Need help?
General