Xerox Phaser 3117 User Manual

U SING P RINT M ATERIALS 3.9
3
•Load transparencies in the tray with print side up , and the
top with the adhesive strip going first .
Notes:
• To prevent transparencies from sticking to each other, do not let
the printed sheets stack up as they are printed out.
• Place transparencies on a flat surface after removing them from
the printer.
• Do not use transparencies that are separating from the backing
sheet.
•Load card stock with print side up , short edge first and
center of the tray.
•Load letterheads in the tray
with the design face up , top
edge towards the printer
.

Xerox Phaser 3117 Specifications

General

Brand	Xerox
Model	Phaser 3117
Category	Printer
Language	English