EasyManuals Logo
Home>Xerox>Printer>Phaser 3140

Xerox Phaser 3140 User Manual

Xerox Phaser 3140
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Media and tray_36
Do not print on media smaller than 76 mm (3.00 inches) wide or 127 mm
(5.00 inches) long.
In the software application, set margins at least 6.4 mm (0.25 inches)
away from the edges of the material.
If media weight is over 160 g/m
2
(43 lb), try printing in the rear cover
(face up).
Letterhead/ Preprinted paper
Letterhead/ Preprinted paper must be printed with heat-resistant
ink that will not melt, vaporize, or release hazardous emissions
when subjected to the machine’s fusing temperature (about
170°C(338 °F) for 0.1 second.
Letterhead/ Preprinted paper ink must be non-flammable and
should not adversely affect machine rollers.
Forms and letterhead should be sealed in a moisture-proof
wrapping to prevent changes during storage.
Before you load letterhead/preprinted paper, verify that the ink on
the paper is dry. During the fusing process, wet ink can come off
preprinted paper, reducing print quality.
Photo
Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
Glossy
Load one paper to the manual tray at a time, glossy side facing up.
USING THE OUTPUT SUPPORT
The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will
help the printed pages to align. The printer sends output to the output tray
by default. To use the output tray, make sure that the rear cover is closed.
SINGLE-SIDED DOUBLE-SIDED
Tray1 Face down Face up
Manual tray Face up Face down

Table of Contents

Other manuals for Xerox Phaser 3140

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 3140 and is the answer not in the manual?

Xerox Phaser 3140 Specifications

General IconGeneral
ColorNo
Maximum resolution600 x 1200 DPI
Time to first page (black, normal)10 s
Print speed (black, normal quality, A4/US Letter)18 ppm
Internal memory8 MB
Maximum internal memory- MB
Sound power level (standby)26 dB
Sound pressure level (printing)50 dB
Total input capacity250 sheets
Total output capacity80 sheets
Maximum duty cycle10000 pages per month
Page description languagesGDI
Maximum print size210 x 297 mm
Media weight (tray 1)60 - 163 gsm
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A4, A5
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Mac compatibilityYes
Custom media sizes76 x 127 - 216 x 356 mm
Compatible operating systemsWindows 2000/XP/2003, Vista, Mac OS
Power consumption (standby)60 W
Power consumption (printing)360 W
Display-
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)360 x 389 x 230 mm

Related product manuals