Supported Paper and Media
Phaser® 4510 Laser Printer
3-5
Paper Storage Guidelines
Providing good storage conditions for your paper and other media contributes to optimum
print quality.
■ Store paper in dark, cool, relatively dry locations. Most paper items are susceptible to
damage from ultraviolet (UV) and visible light. UV radiation, which is emitted by the sun
and fluorescent bulbs, is particularly damaging to paper items. The intensity and length of
exposure to visible light on paper items should be reduced as much as possible.
■ Maintain constant temperatures and relative humidity.
■ Avoid attics, kitchens, garages, and basements for storing paper. Inside walls are drier than
outside walls where moisture can collect.
■ Store paper flat. Paper should be stored on pallets, cartons, shelves, or in cabinets.
■ Avoid having food or drinks in the area where paper is stored or handled.
■ Do not open sealed packages of paper until you are ready to load them into the printer.
Leave paper in the original packaging. For most commercial cut-size grades, the ream
wrapper contains an inner lining that protects the paper from moisture loss or gain.
■ Leave the media inside the bag until you are ready to use it; reinsert unused media in the
bag and reseal it for protection. Some specialty media is packaged inside resealable plastic
bags.
Supported Paper Sizes and Weights
The following sections provide information about paper sizes and weights that can be used in
the printer trays. For more detailed information about paper and other media, print the
Paper Tips page:
1. On the control panel, select
Information, and then press the OK button.
2. Select
Information Pages, and then press the OK button.
3. Select
Paper Tips Page, and then press the OK button to print.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
