Printing on Specialty Media
Phaser® 4510 Laser Printer
3-25
Printing on Specialty Media
This section includes:
■ Printing Transparencies on page 3-25
■ Printing Envelopes on page 3-32
■ Printing Labels on page 3-36
■ Printing Index Cards on page 3-41
■ Printing Custom Size Paper on page 3-43
■ Creating Custom Paper Types on page 3-45
Note: Machine reliability specifications may be affected by increased use of transparency,
card stock, and labels. In addition, variances in machine reliability may occur due to extended
use of some media types.
Printing Transparencies
Transparencies can be printed from all trays. They should be printed on one side only. For best
results, use only recommended Xerox transparencies.
Caution: Damage caused by using unsupported paper, transparencies, and other specialty
media is not covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local representative for details.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/4510supplies
.
Guidelines
■ Remove all paper before loading transparencies in the tray.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases,
which may cause poor print quality.
■ Fan transparencies before loading in the paper tray.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
