Safety
Xerox Phaser 4622
User Guide
133
Laser Safety Information
CAUTION: Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous light exposure.
With specific regard to laser safety, the machine complies with performance standards for laser
products set by government, national and international agencies as a Class 1 laser product. It does not
emit hazardous light, as the beam is totally enclosed during all phases of customer operation and
maintenance.
Machine Safety
This machine has been designed to provide operator access to safe areas only. Operator access to
hazardous areas is restricted using covers or guards, which require a tool to enable removal. Never
remove the covers or guards that protect hazardous areas.
Machine Safety - Do These
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when
used on electromechanical equipment.
• Always follow all warnings and instructions that are marked on or supplied with the machine.
• Before cleaning this machine, unplug the machine from the electrical outlet. Always use materials
specifically designated for this machine, the use of other materials may result in poor
performance and create a hazardous situation.
• Always exercise care when moving or relocating the machine. Please contact your local Xerox
dealer to arrange relocation of the machine to a location outside of your building.
• Always locate the machine on a solid support surface (not on plush carpet) that has adequate
strength to support the weight of the machine.
• Always locate the machine in an area that has adequate ventilation and room for servicing.
• Always unplug this machine from the electrical outlet before cleaning.
Note Your Xerox machine is equipped with an energy saving function to conserve power when the
machine is not in use. The machine may be left on continuously.
Machine Safety - Do Not Do These
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when
used on electromechanical equipment.
• Never use a ground adapter plug to connect the machine to a power outlet that lacks a ground
connection terminal.
• Never attempt any maintenance function that is not specifically described in this documentation.
• Never obstruct ventilation openings. They are provided to prevent overheating.
• Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
• Never locate the machine near a radiator or any other heat source.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
