Xerox Phaser 6280 User Manual

Printing Confidential Documents - Secure Print
Phaser® 6280 Printer
86
9. If you want the printer to automatically name the document using a time stamp, in
the Retrieve Document Name field, select Use Existing Name.
10. Click
OK twice to accept the Secure Print settings, and then click Print to send the job.
Now follow the instructions in Printing from the Control Panel, below, to continue
printing the job.
Printing from the Control Panel
This section explains the procedure to print data stored in the printer by Secure Print.
Note: You can also delete, without printing, secure print data stored in the printer. See
System Setup on page 98.
1. On the control panel, press the
Back Arrow button to display the Walk-Up Features
menu.
2. Select
Secure Print, and then press the OK button.
3. Select your user name, and then press the
OK button.
4. Press the
Up Arrow or Down Arrow button to scroll to the correct number for the first
digit of the numeric password, and then press the
Forward Arrow button to accept that
digit.
Note: The digit becomes an asterisk after you press the Forward Arrow button.
5. Repeat Step 4 for each digit of the password, and then press the
OK button.
6. If you submitted more than one secure print job, select the name of the job that you
want to print, and then press the
OK button.
7. Select
Del after Print or Print and Save, and then press the OK button.
8. Scroll to the desired number of copies, and then press the
OK button to print the job.
The displayed user ID (up to 8 characters) is the
User ID specified in the Secure Print dialog
box of the
Paper/Output tab of the print driver.
For the password, enter the
Password set in the Secure Print dialog box of the Paper/Output
tab of the print driver. If
Password is not configured, there will be no setting on the control
panel.
The document name displayed (up to 12 characters) is the
Document Name specified in
the
Secure Print dialog box of the Basic tab of the print driver.
Note: To use Secure Print and Proof Print, you must have a minimum of 256 MB memory
installed and the RAM Disk must be enabled. For instructions about enabling options, see
Enabling Options on page 134.
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English