Description of Menu Items
Phaser® 6280 Printer
94
Settings Exclusive to Tray 1 (MPT)
When the size or type of paper that is loaded is different from the setting, the print quality
may fall or paper may jam. Specify the correct paper type and size.
When installing the optional sheet feeders if Paper Tray is set to Auto on the print driver,
the feeding tray is automatically specified according to the setting on the control panel.
Also, when the paper size and type setting for each tray is the same, printing continues by
changing the feeding tray if the paper in the specified tray has run out.
Item Description
Display Popup Specifies whether or not to display the message that prompts you to set the paper size
and type every time you load paper in the Tray 1 (MPT).
When you select On, the message that prompts you to set the paper size and type is
displayed.The default is Off.
MPT Mode Specifies the way to set the paper type and size settings to be loaded in Tray 1 (MPT).
• Panel Specified (default)
You can specify the paper type and size settings on the control panel. Printing
can be done only when the settings on the print driver matches the settings on
the control panel. When a mismatch of paper sizes occurs, follow the
instructions displayed on the control panel.
• DriverSpecified
You cannot specify the settings on the control panel. Printing is done using the
settings on the print driver.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General