Xerox Phaser 7100 System Administrator Guide

Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
37
IPP
Internet Printing Protocol (IPP) is used for remote printing and managing print jobs.
Enabling IPP
1. In CentreWare Internet Services, click Properties > Connectivity > Port Settings.
2. Select Enabled next to IPP.
3. Click Apply.
Configuring IPP
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols > IPP.
2. Next to Add Port Number, type the port number to be used by the printer. The default port
number is 80.
3. Select Enabled next to TBCP Filter.
4. To allow only one specific user to control or delete any print job, select Enabled next to
Administrator Mode.
5. Type the Connection Time-Out.
The default time is 60 seconds.
6. Click Apply.

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English