Xerox Phaser 7100 System Administrator Guide

Security
Phaser 7100 Color Printer
System Administrator Guide
55
IP Filtering
You can prevent unauthorized network access by only allowing data to be transmitted to and from
specific IP addresses and ports.
Creating an IP Filter Rule
1. In CentreWare Internet Services, click Properties > Security > IP Filtering.
2. Under IPv4 Filtering or IPv6 Filtering, select Enabled.
3. Click Add under IPv4 Filtering or IPv6 Filtering.
4. Type the Source IP Address. This is the IP address of the computer or device that you want to
allow.
5. Type a number for the Source IP Mask that will use this rule. The allowable range from 0 to 32
corresponds to the 32-bit binary number comprising IP addresses. For example, the number 8
represents Class A address (mask of 255.0.0.0). The number 16 represents a Class B address (mask
of 255.255.0.0). The number 24 represents a Class C address (mask of 255.255.255.0).
6. Refresh the browser and navigate back to the IP Filtering page. Under IP Filter Rule List, select
the rule that you just created.
7. Select your rule in the list, then click Apply.
8. Click Edit or Delete to edit or delete an existing rule.

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm