Printer Settings
Phaser® 7760 Color Laser Printer
4-9
Paper Handling Settings
This section includes:
■ Selecting Tray 1 (MPT) Mode on page 4-9
■ Setting the Duration for the Tray 1 (MPT) Prompt on page 4-11
■ Setting the Duration for the Tray 2–5 Prompt on page 4-12
■ Changing the Load Paper Timeout on page 4-13
■ Setting the Default Paper Destination on page 4-14
■ Selecting the Default for Offsetting Output on page 4-15
■ Setting the Default Stapling Option on page 4-16
■ Setting the Default Punch Option on page 4-17
Selecting Tray 1 (MPT) Mode
The Tray 1 (MPT) Mode setting specifies:
■ How Tray 1 (MPT) paper type and size are determined when you load paper in the tray but
do not select the paper type and size on the control panel.
■ When Tray 1 (MPT) is used for print jobs.
To select the Tray 1 (MPT) mode setting, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Setting Description
Dynamic
(Factory default setting)
■ Uses the settings from the next print job that prints from Tray 1 (MPT)
to determine the paper size and type.
■ Printer will print from Tray 1 (MPT) when specified in the print job or
when no other tray has the job's requested paper size and type.
Static
■ The paper size and type already set for Tray 1 (MPT) stay in effect.
■ Printer will print from Tray 1 (MPT) when specified in the print job or
when no other tray has the job's requested paper size and type.
Automatic
■ Uses the settings from the next print job that prints from Tray 1 (MPT)
to determine the paper size and type.
■ Printer will print from Tray 1 (MPT) when paper is loaded, unless a
different tray is specified in the printer driver.
To Next Page
Loading...
Need help?
General