EasyManuals Logo
Home>Xerox>All in One Printer>VersaLink B7125

Xerox VersaLink B7125 User Documentation

Xerox VersaLink B7125
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #200 background imageLoading...
Page #200 background image
Disconnect the power cord and other cables from the back of the printer.
WARNING: To prevent electric shock, never touch the power plug with wet hands. When
removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord can
damage it, which can lead to fire or electric shock.
Note:
When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the
printer more than 10 degrees can cause toner spillage.
When moving the printer over a long distance, remove the drum cartridge and toner
cartridge to prevent toner from spilling.
Caution: Do not expose the drum cartridge to direct sunlight or strong indoor fluorescent
lighting. Do not touch or scratch the surface of the drum.
Caution: Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The
Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover damage to
the printer caused by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
Troubleshooting
GGeenneerraall TTrroouubblleesshhoooottiinngg
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.
PPrriinntteerr DDooeess NNoott PPoowweerr OOnn
Probable Causes Solutions
The power switch is not switched on.
Open the front door, then and check that the
power switch is in the On position.
At the printer control panel, press the Power/
Wake button. For details, refer to Powering On the
Printer.
The power cord is not plugged into the outlet
correctly.
Power off the printer, then plug the power cord into
the outlet securely. Use the bracket provided with the
printer to secure the power cord in place.
The power cord is not secured in place correctly. Use the bracket provided with the printer to secure
the power cord in place.
200

Table of Contents

Other manuals for Xerox VersaLink B7125

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink B7125 and is the answer not in the manual?

Xerox VersaLink B7125 Specifications

General IconGeneral
BrandXerox
ModelVersaLink B7125
CategoryAll in One Printer
LanguageEnglish

Related product manuals