Xerox versalink C7020 User Manual

CCoonnnneeccttiinngg ttoo aa TTeelleepphhoonnee LLiinnee
WARNING: To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
1. Ensure that the printer is powered off.
2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on
the back of the printer.
3. Connect the other end of the RJ11 cable to an operating telephone line.
4. Power on the printer.
5. Enable and configure the Fax functions.
IInniittiiaall PPrriinntteerr SSeettuupp
Before installing the printer software, verify that the printer is set up correctly. Setup includes
enabling the optional features and assigning an IP address for the Ethernet network connection. The
installation wizard starts automatically the first time the printer is powered on. The installation wizard
prompts the system administrator to configure the following settings:
• Language
• Network Connection
• Proxy Server Setup
• Date and Time
• Measurements
• LDAP Settings
• Apps Setup
• Security Settings
For more information on configuring the printer settings, refer to the System Administrator Guide at
www.xerox.com/office/VLC70XXdocs.
52
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
Getting Started

Xerox versalink C7020 Specifications

General

Brand	Xerox
Model	versalink C7020
Category	All in One Printer
Language	English