Xiaomi Mi Smart Projector 2 User Manual

11
Regulatory Compliance
H
ereby, [
Formovie (Chongqing) Innovative Technology Co., Ltd.
] declares that the radio equipment type [Mi Smart Projector 2
/
XMTYY02FMGL
] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://www.mi.com/global/service/support/declaration.html
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.
Operation Frequency: 2.4 GHz–2.4835 GHz (for Bluetooth)
Maximum RF Power Output: < 10 mW (for Bluetooth)
Operation Frequency: 2.4 GHz–2.4835 GHz (for Wi-Fi 2.4 GHz)
Maximum RF Power Output: < 100 mW (for Wi-Fi 2.4 GHz)
Operation Frequency: 5.15 GHz–5.35 GHz and 5.47 GHz–5.725 GHz (for Wi-Fi 5 GHz)
Maximum RF Power Output: < 200 mW (for Wi-Fi 5 GHz)
Note: Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna
and the body of the user.
- Risk of explosion if the battery is replaced by an incorrect type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should
not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over
your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed
by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the
environment and human health. Please contact the installer or local authorities for more information about the location as well as
terms and conditions of such collection points.
The product complies with “RG1 IEC 62471-5:2015”.
Caution:

Xiaomi Mi Smart Projector 2 Specifications

General

Projection distance	1.6 - 3.2 m
Projection technology	DLP
Contrast ratio (typical)	-
Screen size compatibility	60 - 120 \
Projector native resolution	1080p (1920x1080)
Focus	Auto
Throw ratio	1.2:1
Light source type	LED
Service life of light source	- h
Supported video modes	1080p
DVI port	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	5.0
Noise level	28 dB
RMS rated power	10 W
Number of built-in speakers	2
Product type	Standard throw projector
Product color	Black, White
Market positioning	Home cinema
Power source	AC
AC adapter output voltage	19 V
Power consumption (standby)	0.5 W
Power consumption (typical)	65 W
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Harmonized System (HS) code	85286200

Weight and Dimensions

Depth	150 mm
Width	115 mm
Weight	1300 g