EasyManuals Logo
Home>Xiaomi>Projector>Mi Smart Projector 2

Xiaomi Mi Smart Projector 2 User Manual

Xiaomi Mi Smart Projector 2
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7
Auto Focus Keystone Correction
Go to Settings > Projector > Focus and select Execute Focus, the
screen will focus and once it is finished you can press the left or
right button on the remote control for further fine-tuning.
Go to Settings > Projector > Keystone Correction > Keystone
Correction, and use the up and down buttons to select Quick
Adjustment, Fine Tuning, and Reset, then press the OK button
to enter the correction mode.
If the projector is moved, it will start automatic keystone
correction and the projected image will be adjusted automatically.
Note: Go to Settings > Projector > Keystone Correction, to
configure Auto Keystone. Auto Keystone is enabled by default.
Go to Settings > Projector > Focus and select the Auto
Focus switch, when it is enabled, moving the projector will
automatically trigger the screen to focus.
Quick Adjustment
Fine Tuning
Reset

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xiaomi Mi Smart Projector 2 and is the answer not in the manual?

Xiaomi Mi Smart Projector 2 Specifications

General IconGeneral
Projection distance1.6 - 3.2 m
Projection technologyDLP
Contrast ratio (typical)-
Screen size compatibility60 - 120 \
Projector native resolution1080p (1920x1080)
FocusAuto
Throw ratio1.2:1
Light source typeLED
Service life of light source- h
Supported video modes1080p
DVI portNo
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version5.0
Noise level28 dB
RMS rated power10 W
Number of built-in speakers2
Product typeStandard throw projector
Product colorBlack, White
Market positioningHome cinema
Power sourceAC
AC adapter output voltage19 V
Power consumption (standby)0.5 W
Power consumption (typical)65 W
Storage temperature (T-T)-20 - 55 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)0 - 90 %
Operating relative humidity (H-H)20 - 80 %
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth150 mm
Width115 mm
Weight1300 g

Related product manuals