Xilinx ML505 Getting Started Tutorial

14 www.xilinx.com ML505/ML506/ML507 Getting Started Tutorial
UG348 (v3.0.2) October 9, 2008
ML50x Demonstrations in System ACE CF
R
ML50x Demonstrations in System ACE CF
Bootloader Demonstrations
To select configuration using System ACE CF, set the configuration address and mode DIP
switch (8-position DIP switch) to 00010101. To return to the ML50x Bootloader at
anytime, press the SYSACE RESET button.
Location
System ACE configuration address 0.
Description
The ML50x Bootloader demonstration displays a menu of demonstration designs that can
be loaded by using the System ACE controller’s reconfiguration feature. The menu is
displayed on the serial terminal, LCD, and VGA.
To choose a demonstration, use the North-East-South-West-Center-oriented pushbuttons
on the board (Figure 6), then press the center button to start the demonstration.
Alternatively, you can select a demonstration by entering its number into the serial
terminal.
The demonstrations are:
• “Virtex-5 FPGA Slide Show,” page 15
• “Web Server (ML505/ML506 - Using Soft Ethernet MAC IP Core),” page 16
• “Web Server (ML507 - Using Integrated Tri-Mode Ethernet MAC Block),” page 18
• “Simon Game,” page 20
• “Board Verification Using XROM,” page 21
• “USB,” page 22
• “My Own ACE File,” page 23
• “Ring Tone Player,” page 24
Figure 6: User Pushbuttons
UG228_06_040408
West (W)
South (S)
East (E)
North (N)
Center (C)
www.BDTIC.com/XILINX

Xilinx ML505 Specifications

General

Brand	Xilinx
Model	ML505
Category	Motherboard
Language	English