XOGRIDDLE30 10 7/8” 24” 28 3/4”
A
B
C
Overhung Countertop
Notch Cutout Detail
XOG30JACKET 12” 25 3/4” 31 1/4”
cutout dimensions
INSTALLATION IN A COUNTERTOP
NON-COMBUSTIBLE CONSTRUCTION
When installing your XO griddle in a location built using non-combustible materials such as
masonry - use the smaller dimension cutouts: 10 7/8” H x 24” D x 28 3/4” W
COMBUSTIBLE CONSTRUCTION
When installing your XO griddle in a location built using combustible materials such as wood
or vinyl - you must install the XOG30JACKET liner first -
use the larger cutout dimensions:
12” H x 25 3/4” D x 31 1/4” W
THE NOTCH
IMPORTANT NOTE: The depth shown is measured from the vertical face of the counter.
When the coutertop overhangs the counter, you must notch both corners of the cutout as
shown above. The width of the notch is 9/16” - the depth of the notch is equal to the depth
of the overhang. If the coun
tertop overhans by 1”, the notch should be 1” deep back to the
vertical face of the counter.
The notch allows the bullnose of the griddle to be recessed for a finished look.
10
To Next Page
Loading...
General