DETAIL
3. FRONT & REAR SUSPENSION
DETAIL
47.5 mm
3x16mm
L=R
2x
3x16mm
L=R
Roll Center Position:
Roll Center Position:
Roll Center Position:
902316
SH M3x16
303134-K
SHIM 3x7.5x1.5
303129
SHIM 3x6x1
THIN COMPOSITE SHIM
3x6x1mm
THICK ALU SHIM
3 x 7.5 x 1.5mm
THICK ALU SHIM
3 x 7.5 x 1.5mm
THIN COMPOSITE SHIM
3x6x1mm
It is extremely important that
the arms move freely on the
pivot pins. If they do not, use
the #107633 HUDY Arm
Reamer to slightly resize the
holes in the arms.
Use these suspension holders for initial assembly
50.5 mm
THIN COMPOSITE SHIM
3x6x1mm
3x14mm
3x16mm
2x
1:1
L=R
Roll Center Position:
(more traction, more on-power push)
(more incorner steering,
can cause tire overheating)
(less in-corner steering, easier to drive)
(better cornering speed, less traction)
Roll Center Position:
Roll Center Position:
Use these suspension holders for initial assembly
303129
SHIM 3x6x1
902316
SH M3x16
303129
SHIM 3x6x2
902314
SH M3x14
THICK ALU SHIM
3 x 7.5 x 1.5mm
303134-K
SHIM 3x7.5x1.5
THICK COMPOSITE SHIM
3x6x2mm
It is extremely important that the arms move freely
on the pivot pins. If they do not, use the #107633
HUDY Arm Reamer to slightly resize the holes in
the arms.
DETAIL
DETAIL
To Next Page
Loading...
Need help?
General
