Xray T3 2012 - Final Assembly Setup Adjustments; Ride Height and Droop Adjustment

30


960140
N M4
DETAIL
7. FINAL ASSEMBLY

    
        

CA
Make sure the wheel nuts are very tight, so the
wheels do not loosen during racing.
FIBRE TAPE
(HUDY #107870)
(NOT INCLUDED)
LIPO BATTERY PACK
(NOT INCLUDED)
WHEELS & TIRES & INSERTS
(NOT INCLUDED)
4x
or the optional battery holders:
#306163-K XRAY Graphite Battery Holder - Black
The XRAY Graphite Battery Holder can be used for LiPo as well. However, depending on the height of the LiPo
batteries additional shims may have to be mounted below the stands.
We recommend using #107870
HUDY Fibre Reinforced Tape