903308
SFH M3x8
981212
P 2x12
902306
SH M3x6
L=R
FRONT SHOCK
C3.0 SPRING
INITIAL POSITION
To make the car more stable and easier to drive, move the front shocks forward. Stability increases
mainly in chicanes. Note that the car will have less steering into corners.
• Upper mount (shock tower): Add a plastic nut and use a longer screw 3x8mm (NOT INCLUDED)
to move the upper end of the shock away from the shock tower.
• Lower mount (lower arm): Add shims and use a longer setscrew 3x10mm (NOT INCLUDED) on
the lower arms to move the lower end of the shock away from the arm.
7. FRONT & REAR ASSEMBLY
L=R
INITIAL POSITION
308019 Set of Shock
Shims & Nuts
To Next Page
Loading...
Need help?
General
