3. As the electronic control systems of different models are
more complicated, if you encounter situations where it is
impossible to test or a large amount of test data is abnormal,
you can search for the ECU of the vehicle and select the menu
through the model on the ECU nameplate;
4. If the vehicle type or electronic control system to be tested
is not found in the D8 BT diagnostic function, please upgrade
the vehicle diagnostic software to the latest version or consult
the technical service department;
5. It is forbidden to use wiring harnesses other than Xtool for
connection testing to avoid unnecessary losses;
6. In the communication between the D8 BT Smart Diagnosis
System and the vehicle, it is forbidden to shut down directly.
You should cancel the task before returning to the main
interface.
4.2. DIAGNOSIS
After the tablet device is properly connected to the vehicle, you
could start the vehicle diagnosis.
VEHICLE SELECTION
The D8 BT intelligent diagnosis system supports the following
4 ways to access the vehicle diagnosis system.
To Next Page
Loading...
Need help?
General
