5.6 THROTTLE
Throttle Position Sensor (TPS) Match, this function enables
you to make initial settings to throttle actuators and returns the
“learned” values stored on ECU to the default state. Doing so
can accurately control the actions of regulating throttle (or idle
engine) to adjust the amount of air intake.
The operation guidelines of the Throttle function are
shown as below:
1. Enter the Throttle menu and choose relevant models
according to the vehicle being tested.
2. Enter the Auto Recognition menu and turn on the ignition
switch.
3. Read carefully and complete the requisites listed before
performing the throttle regeneration function. And press
OK after completing the instructions shown.
To Next Page
Loading...
Need help?
General
