Yaesu FT-70DR User Manual

21FT-70DR/FT-70DE Operating Manual
For example, if the transmit and receive DG-ID numbers of group members are all set to "50",
communications from other DG-ID numbers is not received and only the group members setting
the same DG-ID numbers may communicate. Also, the other stations set the receive DG-ID to any
number except for "00" may not be received the signals of your stations.
DG-ID
T50
（
transmit
）
R50
（
receive
）
DG-ID
T50
（
transmit
）
R50
（
receive
）
The group member set the DG-ID number to “50”
Only group members set to the same DG-ID
number may communicate.
Setting the receive DG-ID number to
“00” , all the C4FM digital stations
may be received signals
DG-ID
T00
（
transmit
）
R00
（
receive
）
DG-ID
T00
（
transmit
）
R00
（
receive
）
DG-ID
T90
（
transmit
）
R90
（
receive
）
The other station set the receive DG-ID
number to the number except for “00”
may not received the signals that is not
matching the DG-ID number.
About the GM
(
Group Monitor
)
feature
The GM
(
Group Monitor
)
function automatically checks to find if there are any stations
with the GM function in operation with the same DG-ID number within communication
range. Setting the receive DG-ID number to “00” will check for all the C4FM digital sta-
tions In/Out of range.
z
Activating the GM
(
Group Monitor
)
function, the Digital C4FM
mode is changed. For communicating in the Analog FM mode,
Set the GM function OFF.
z
The other member stations must also turn the GM
(
Group
Monitor
)
function ON.
In/Out indication
GM icon
When the GM
(
Group Monitor
)
is activated, the following information screens are auto-
matically switched.
Group Mode Display
(Automatically switching display)
GM information screen
Memory Tag Display
*1
Frequency DisplayOwn DG-ID Number Display
*
1
：Memory tag display is displayed in the case of the memory channel or the home channel setting the memory tag.

Yaesu FT-70DR Specifications

General

Brand	Yaesu
Model	FT-70DR
Category	Transceiver
Language	English