Name: Yaesu FT-8900R
Brand: Yaesu
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INTRODUCTION

Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK) Page 12 of 77

button: default setting is TONE function

Press this button repeatedly to select the CTCSS or DCS mode on the Main band:

ENC → ENC.DEC (Tone Squelch) → DCS

button: default setting is LOW function

Press this button repeatedly to select the transmitter power output level on the Main

band:

LOW: 5 watts VHF/UHF

MID2: 10 watts VHF/UHF

MID1: 20 watts VHF/UHF

HIGH: 50 watts VHF, 35 watts UHF

When the Main band is set to the Memory mode or Home Channel, press and hold in

this key for ½ second to switch the memory channel display between the Frequency

format and Alpha-numeric Tag format.

(4) LAMP Switch

This switch illuminates the Microphone keypad.

(5) LOCK Switch

This switch locks out the Microphone buttons (except for the keypad and PTT switch).

(6) / buttons

Press (or hold in) either of these buttons to tune (or scan up or down) the operating frequency

or through the memory channels on the Main band. In many ways, these buttons emulate the

function of the (rotary) DIAL knob.

Other manuals for Yaesu FT-8900R

Questions and Answers:

Need help?

Do you have a question about the Yaesu FT-8900R and is the answer not in the manual?

General