Yaesu FT-8900R User Manual

REGULAR MEMORY
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK) Page 33 of 77
3. Within ten seconds of pressing the SET key, use the DIAL knob, or the
microphone’s and buttons, to select the desired memory channel for
storage. If the channel is already occupied by data stored previously, the channel's
frequency will appear on the display.
4. Press the SET key momentarily to save the entry and exit to normal operation.0.
Create a Name Tag for a Memory Channel
To add an Alpha-numeric Name Tag to a memory:
1. Press the SET key momentarily to enter the Set mode.
2. Rotate the DIAL knob to select Menu #25 NAME.
3. Press the DIAL knob momentarily to select the first character location. The
character at this location will blink.
4. Rotate the DIAL knob to select the apha-numeric character you wish to store in
the blinking location, then press the DIAL knob momentarily to move on to the
next character.
5. Again rotate the DIAL knob to select the desired letter, number, or symbol, then
press the DIAL knob momentarily to move on to the next character location. If
you make a mistake, press the microphone’s button to move back to the previous
character slot, then re-select the correct letter, number, or symbol.
6. Repeat step 5 to program the remaining letters, numbers, or symbols of the desired
Name Tag. A total of six characters may be used in the creation of a tag.
7. When you have completed the creation of the Name Tag, press and hold in the SET
key momentarily to save the tag and exit to normal operation.0.
To modify an Alpha-numeric Name Tag for a memory:
1. Press the SET key momentarily to enter the Set mode.
2. Rotate the DIAL knob to select Menu #25 NAME.
3. Press the DIAL knob momentarily to display the Name Tag.
4. Press the DIAL knob momentarily to select the first character location. The
character at this location will blink.
5. Press the microphone’s and buttons to move to the character location you
want to modify, rotate the DIAL knob to select the apha-numeric character you
wish to store in the blinking location, then press the DIAL knob momentarily to
move on to the next character location.

Yaesu FT-8900R Specifications

General

Brand	Yaesu
Model	FT-8900R
Category	Transceiver
Language	English