INTERNET CONNECTION FEATURE
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK) Page 56 of 77
5. Press the DIAL knob momentarily, then rotate the DIAL knob to set this
Item to INT.MEM (to enable the alternative Internet Link, and disable the WIRES™
access option).
6. Press and hold in the DIAL knob for ½ second to save the new setting and exit to
normal operation.
7. Press the left VOL knob momentarily to activate the Internet Link System. INT ON will
be displayed for 2 seconds in the Main band frequency field. The int icon will then be
displayed in the memory channel field on the Sub band while the Internet Link System
access feature is engaged.
8. Rotate the DIAL knob, while pressing and holding in the left VOL knob, to select
the DTMF access number (IMEM 1 through IMEM16) corresponding to the Internet Link
repeater to which you wish to establish an Internet Link.
9. With the Internet Link feature activated, press the left VOL knob, or microphone’s
key, to send out the DTMF tones according to your selection in step 8 (to establish the
link to the Internet Link repeater).
10. To disable the Internet Link feature, press the left VOL knob again. 0.
To return to WIRES™, recall Menu #17 INET, then set it to INT. COD.
To Next Page
Loading...
Need help?
General
