FTA-750/FTA-550 OperATing MAnuAl
63
WaypoInt naVIgatIon (Fta-750 only)
The navigation feature of the
FTA-750
is presented in a
compass that helps you to gure out the destination and
your traveling direction at a glance.
The destination can be selected from the memory
channels and the list of points you have selected
previously, or can be directly specied.
Notes:
Be sure that the internal GPS unit has been activated
before using the navigation.
The navigation does not work when insufficient
number of GPS satellites are captured to obtain your
position.
Entering the Navigation (NAVI) Mode
Select
“
NAVI
” on the
MENU
screen by press-
ing the
[
◄
]
or
[
►
]
key, and then press the
[
ENT
]
key.
The compass screen including the destination you
have selected last time will be displayed if you did
not reach there before switching the operation mode
or turning off the radio.
133.800
VOL
SOGkph
360
COG T
000
°
DSTkm
10
KLAX
BUSY
KLAX-ATIS
MR
ALL
Compass rose
Course indicator
Destination indicator
Tag name of the destination
DST (distance)
COG (course over ground)
SOG (speed over ground)
The compass rose rotates to display the travelling
course up.
To Next Page
Loading...
Need help?
General
