Yaesu G-1000DXA User Manual

14
G-800DXA / -1000DXA / -2800DXA User Manual
External Control
The optional
GS-232B
Computer Control Interface Unit allows the Rotator to be controlled by a personal computer.
Pin Function
1 Connect Pin 1 to Pin 5 to rotate clockwise
2 Connect Pin 2 to Pin 5 to rotate counterclockwise
3 Apply 0V to 5V to control rotator speed proportionally
4 Outputs 2 to 4.5 VDC, corresponding to 0° to 450° rotation
5 Common ground
6 N.C.
● The Rotor Rotation Angle Detection Output voltage at connector pin 4 can be adjusted using OUT VOL ADJ on the
controller rear panel.
● By adjusting the pin 4 output voltage to 4.5V when the rotor rotates to 450°, rotation from 0° to 450°can be converted
to approximately 0V to 4.5V. Because of the cable and component resistance values, the 0° voltage may not start from
exactly 0V.
YAESU MUSEN CO., LTD.
①
③④
⑥ ⑤
②

Yaesu G-1000DXA Specifications

General

Brand	Yaesu
Model	G-1000DXA
Category	Controller
Language	English